03
Hours
:
59
Minutes
:
08
Seconds
Back to blog
November 16, 2026

Mixing vs Mastering: What's the Difference?

Quick answer: Mixing and mastering are two different stages. Mixing takes the individual recorded tracks of a song and blends them into one finished stereo mix: levels, EQ, compression, effects, panning and automation. Mastering works on that finished mix and prepares the whole record for release: it fine-tunes the overall tone and dynamics, makes songs sit well together in an album, sets the loudness, and delivers the files in the formats needed. Mixing is about the relationships between the tracks inside a song. Mastering is about the song as a whole and about how songs relate to each other and to the listener's playback.

This guide explains the difference with examples from Puremix sessions with mastering engineers Brian Lucey and Dave Kutch and with Fab Dupont, who has mixed and mastered. It also covers what mastering can and cannot fix, and how to prepare a mix to send for mastering.

Mixing vs mastering at a glance

 MixingMastering
Starting materialMany tracks: drums, bass, guitars, vocals, effectsThe finished stereo mix (some engineers also work from stems)
Main goalBalance and shape every element so the song worksPrepare the finished record for release, and enhance it
ScopeOne song at a timeThe whole song, and the whole album or release
Typical movesLevels, EQ, compression, saturation, reverb, delay, automationSubtle EQ, compression and limiting, stereo width, sequencing, level matching, delivery formats
Size of changesLarge, track by trackSmall and subtle, on everything at once
ComesAfter recordingAfter mixing

What mixing is

The mixing engineer's job starts when recording is finished. You decide what matters most, set levels around it, shape tone and dynamics, add depth and character, fix problems such as phase or low-end buildup, and check that the mix translates outside the studio. We describe the full job in What Does a Mixing Engineer Do?. For a step-by-step beginner guide, see the complete guide to mixing.

The key point is that a mix is made of many separate decisions. If the kick and bass fight, you can change one of them. If the vocal is too dull, you can change only the vocal.

What mastering is

Mastering is the last creative and technical step before release. In his short Introduction to mastering, Fab Dupont explains where mastering came from, how it evolved and why it matters as much as recording and mixing. He says its goals are not just about making a record louder than somebody else's.

Mastering engineer Brian Lucey describes it this way: "Mastering is not a fixing step, it's an enhancing step." In Brian Lucey: Limiting and Saturation, he starts an album project by loading the songs into his DAW in the correct order and working on the transitions between songs, which he calls "tips and tails", balancing levels and tweaking each song's EQ. Then he moves to an analog chain and back to digital for limiting and saturation, using a mild limiter setting.

Mastering works on the whole picture

Because the mastering engineer treats the entire stereo mix, the moves are different from mixing:

  • Stereo balance. In Shape of the V with Brian Lucey, Lucey describes how the low end is distributed across the stereo field in different genres, and how he sometimes adjusts the low end of the sides.
  • Mid/side processing. In M/S EQ During Mastering with Fab Dupont, Fab solos the side channel of a song, hears frequencies bunching up in the lower mids, and cuts there. This is a small change to the sides only, which is hard to do on individual tracks.
  • Consistency across songs. Levels and tone are matched so an album plays as one record.
  • Format-specific work. Streaming files are not the only target. Dave Kutch's vinyl lathe overview shows how cutting a lacquer for vinyl involves its own decisions.

Loudness belongs to mastering, but starts in the mix

Loudness is the most common reason people talk about mastering. Mastering engineer Dave Kutch says in Dave Kutch loudness targets that loudness targets are "the last thing I'm thinking about when I'm mastering": what matters is that the song sounds as good as it can. The post also explains why streaming loudness normalization ended much of the pressure to make everything as loud as possible, and recommends keeping the true peak below -1 dB to avoid distortion when files are converted to streaming formats.

But a master can only be as loud and clean as the mix allows. In How to Make a Loud Master Without Destroying Your Mix, we explain that loud masters come from great mixes, and that if you cannot get loud without distortion, the fix is usually upstream in the mix and not in the limiter. A tight low end also helps, because bass uses up headroom faster than anything.

If you want to measure loudness while you work, our sister company Process.Audio explains the numbers in LUFS Explained: How Loud Should Your Master Be in 2026? and True Peak vs Sample Peak.

Is mix bus processing mastering?

Not exactly. Many mixing engineers put processing on the mix bus as part of the mix, and it is not a replacement for mastering. Darrell Thorp adds bus compression to tighten a live recording in Mix Bus Compression | Darrell Thorp, and Fab Dupont uses an SSL bus compressor to give a mix more density in SSL Bus Compressor | Fab Dupont. These are mixing decisions, made while hearing every element in context. The difference is the stage and the goal: the mix bus shapes the mix you are making, and mastering shapes the finished record.

What mastering cannot fix

Mastering does not fix a bad mix. It sees the finished stereo file, so it cannot rebalance a vocal that is too quiet or remove a clash between two instruments without affecting everything else. When a problem lives in one track, the right fix is a new mix. A mastering engineer can sometimes help by asking for a revision or for stems, but the best preparation is a mix that already works.

Do you need a separate mastering engineer?

You can master your own music, and many people do. Fab Dupont also lists reasons to hire a mastering engineer in his introduction to mastering. The usual argument is a fresh pair of ears in a well-tuned room, from someone who did not make the mix. If you master yourself, take a break between mixing and mastering, listen on several systems and compare against references. Brian Lucey's video Mastering philosophy & techniques covers how he chooses and uses reference tracks and how to improve your room's acoustics.

How to prepare a mix for mastering

Ask your mastering engineer for their specs, because they vary. Common advice, as in this Production Expert guide, includes:

  1. Do not use the mix bus limiter to chase loudness. Most guides say to bypass a final limiter when you bounce, so the mastering engineer receives the dynamics you mixed. Opinions differ on gentle bus compression: if it is part of your mix sound, keep it, and mention it.
  2. Leave some headroom and avoid clipping. Recommended amounts vary from one engineer to another, so ask. Turning down a clipped bounce does not remove the clipping.
  3. Export a full-resolution file. Usually WAV or AIFF at the session's sample rate and a high bit depth, and not an MP3.
  4. Do not normalize. It changes the file before mastering without adding anything.
  5. Check the mix on several speakers. What you hear now is what will be mastered.
  6. Add notes. Tell the engineer what matters to you and share your reference tracks.

FAQ

What is the difference between mixing and mastering?

Mixing blends the individual tracks of a song into a finished stereo mix. Mastering prepares that finished mix, and the whole release, for distribution: it adjusts overall tone, dynamics and loudness, matches the songs to each other and delivers the correct files.

Which comes first, mixing or mastering?

Mixing comes first, then mastering. Mastering needs a finished mix.

Can mastering fix a bad mix?

Not really. It can improve overall balance, but it cannot rebalance individual tracks. If the problem is in one instrument, go back to the mix.

Do I need to master my song before releasing it?

Mastering is the standard last step before release. You can do it yourself or hire an engineer, but a mix that has not been checked against references and on several systems is not ready.

Is the mix bus compressor part of mastering?

No. It is usually a mixing decision made while you hear every element. Mastering happens after the mix is finished.

Can the same person mix and master?

Yes, but a fresh pair of ears and a different listening room are the usual reasons to separate them.

How loud should a master be?

It depends on the music and the platform, and engineers such as Dave Kutch focus on what sounds best. Streaming platforms normalize loudness, so pushing far above their targets mostly costs dynamics. See our guide to making a loud master.

Want to see mastering done in real sessions? Watch the free Puremix videos, explore the mastering videos with Brian Lucey and Fab Dupont, or see the Puremix plans. For a structured path into how professional audio works, the Core Audio Certification Program on Campus starts with the people, places and process of professional audio.

Disclosure: Puremix, Campus and Process.Audio are sister brands. Details come from Puremix sessions and published preparation guides, checked in November 2026.

Written by Jose Carlos Arregui
Learn to record, produce and mix from the engineers behind the records.